⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Waukesha County › Butler (53007)

Butler, WI (53007): well depth, water level & drilling cost

✓ 2,292 WI DNR records · Waukesha County

244 ftmedian well depth
182 ft–344 fttypical depth range
79 ftmedian static water level
15 gpmmedian yield (52 tests)

Pull every recorded well near a Butler (53007) address — $49

How deep are wells in and around Butler (53007), Wisconsin?

The median drilled well depth in and around Butler (53007) is 244 ft, based on 66 wells with recorded depths in the state WI DNR database. Half fall between 182 ft and 344 ft; 90% are shallower than 388 ft.

How much does it cost to drill a well in and around Butler (53007)?

Applying published per-foot rates to the local median depth of 244 ft: drilling and casing alone typically runs $6,100–$15,860; a complete system including pump, pressure tank, and hookup typically runs $14,640–$24,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Butler (53007)?

The median static water level is 79 ft below ground surface (middle half of wells: 38 ft–121 ft), from 56 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 5 100–150 ft 8 150–200 ft 6 200–300 ft 21 300–400 ft 22 400–600 ft 3 600+ ft 1
Looking at a specific property in Butler (53007)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Butler (53007)

Free. Goes to licensed drillers working Waukesha County.

Part of Waukesha County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.