Wisconsin Well Data › Waukesha County › Brookfield (53008)
Brookfield, WI (53008): well depth, water level & drilling cost
✓ 1,230 WI DNR records · Waukesha County
Pull every recorded well near a Brookfield (53008) address — $49
How deep are wells in and around Brookfield (53008), Wisconsin?
The median drilled well depth in and around Brookfield (53008) is 245 ft, based on 75 wells with recorded depths in the state WI DNR database. Half fall between 183 ft and 288 ft; 90% are shallower than 342 ft.
How much does it cost to drill a well in and around Brookfield (53008)?
Applying published per-foot rates to the local median depth of 245 ft: drilling and casing alone typically runs $6,125–$15,925; a complete system including pump, pressure tank, and hookup typically runs $14,700–$24,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Brookfield (53008)?
The median static water level is 54 ft below ground surface (middle half of wells: 31 ft–78 ft), from 70 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Waukesha County.
Part of Waukesha County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.