⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sheboygan County › Cascade (53011)

Cascade, WI (53011): well depth, water level & drilling cost

✓ 1,008 WI DNR records · Sheboygan County

171 ftmedian well depth
112 ft–237 fttypical depth range
46 ftmedian static water level
15 gpmmedian yield (489 tests)

Pull every recorded well near a Cascade (53011) address — $49

How deep are wells in and around Cascade (53011), Wisconsin?

The median drilled well depth in and around Cascade (53011) is 171 ft, based on 494 wells with recorded depths in the state WI DNR database. Half fall between 112 ft and 237 ft; 90% are shallower than 269 ft.

How much does it cost to drill a well in and around Cascade (53011)?

Applying published per-foot rates to the local median depth of 171 ft: drilling and casing alone typically runs $4,275–$11,115; a complete system including pump, pressure tank, and hookup typically runs $10,260–$17,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Cascade (53011)?

The median static water level is 46 ft below ground surface (middle half of wells: 24 ft–77 ft), from 491 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 90 100–150 ft 104 150–200 ft 92 200–300 ft 171 300–400 ft 26 400–600 ft 3 600+ ft 0
Looking at a specific property in Cascade (53011)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Cascade (53011)

Free. Goes to licensed drillers working Sheboygan County.

Part of Sheboygan County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.