⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Ozaukee County › Cedarburg (53012)

Cedarburg, WI (53012): well depth, water level & drilling cost

✓ 2,292 WI DNR records · Ozaukee County

165 ftmedian well depth
142 ft–205 fttypical depth range
25 ftmedian static water level
15 gpmmedian yield (817 tests)

Pull every recorded well near a Cedarburg (53012) address — $49

How deep are wells in and around Cedarburg (53012), Wisconsin?

The median drilled well depth in and around Cedarburg (53012) is 165 ft, based on 831 wells with recorded depths in the state WI DNR database. Half fall between 142 ft and 205 ft; 90% are shallower than 250 ft.

How much does it cost to drill a well in and around Cedarburg (53012)?

Applying published per-foot rates to the local median depth of 165 ft: drilling and casing alone typically runs $4,125–$10,725; a complete system including pump, pressure tank, and hookup typically runs $9,900–$16,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Cedarburg (53012)?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–39 ft), from 827 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 40 100–150 ft 258 150–200 ft 273 200–300 ft 220 300–400 ft 33 400–600 ft 3 600+ ft 0
Looking at a specific property in Cedarburg (53012)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Cedarburg (53012)

Free. Goes to licensed drillers working Ozaukee County.

Part of Ozaukee County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.