⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Calumet County › Chilton (53014)

Chilton, WI (53014): well depth, water level & drilling cost

✓ 638 WI DNR records · Calumet County

180 ftmedian well depth
141 ft–220 fttypical depth range
40 ftmedian static water level
20 gpmmedian yield (287 tests)

Pull every recorded well near a Chilton (53014) address — $49

How deep are wells in and around Chilton (53014), Wisconsin?

The median drilled well depth in and around Chilton (53014) is 180 ft, based on 305 wells with recorded depths in the state WI DNR database. Half fall between 141 ft and 220 ft; 90% are shallower than 280 ft.

How much does it cost to drill a well in and around Chilton (53014)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Chilton (53014)?

The median static water level is 40 ft below ground surface (middle half of wells: 27 ft–64 ft), from 295 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 17 100–150 ft 71 150–200 ft 96 200–300 ft 96 300–400 ft 17 400–600 ft 2 600+ ft 4
Looking at a specific property in Chilton (53014)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Chilton (53014)

Free. Goes to licensed drillers working Calumet County.

Part of Calumet County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.