Wisconsin Well Data › Waukesha County › Delafield (53018)
Delafield, WI (53018): well depth, water level & drilling cost
✓ 3,509 WI DNR records · Waukesha County
Pull every recorded well near a Delafield (53018) address — $49
How deep are wells in and around Delafield (53018), Wisconsin?
The median drilled well depth in and around Delafield (53018) is 177 ft, based on 2,060 wells with recorded depths in the state WI DNR database. Half fall between 88 ft and 255 ft; 90% are shallower than 353 ft.
How much does it cost to drill a well in and around Delafield (53018)?
Applying published per-foot rates to the local median depth of 165 ft: drilling and casing alone typically runs $4,125–$10,725; a complete system including pump, pressure tank, and hookup typically runs $9,900–$16,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Delafield (53018)?
The median static water level is 44 ft below ground surface (middle half of wells: 27 ft–70 ft), from 2,038 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Waukesha County.
Part of Waukesha County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.