⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Ozaukee County › Grafton (53024)

Grafton, WI (53024): well depth, water level & drilling cost

✓ 2,079 WI DNR records · Ozaukee County

184 ftmedian well depth
145 ft–234 fttypical depth range
39 ftmedian static water level
15 gpmmedian yield (959 tests)

Pull every recorded well near a Grafton (53024) address — $49

How deep are wells in and around Grafton (53024), Wisconsin?

The median drilled well depth in and around Grafton (53024) is 184 ft, based on 982 wells with recorded depths in the state WI DNR database. Half fall between 145 ft and 234 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Grafton (53024)?

Applying published per-foot rates to the local median depth of 184 ft: drilling and casing alone typically runs $4,600–$11,960; a complete system including pump, pressure tank, and hookup typically runs $11,040–$18,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Grafton (53024)?

The median static water level is 39 ft below ground surface (middle half of wells: 25 ft–65 ft), from 972 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 45 100–150 ft 234 150–200 ft 287 200–300 ft 313 300–400 ft 87 400–600 ft 12 600+ ft 2
Looking at a specific property in Grafton (53024)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Grafton (53024)

Free. Goes to licensed drillers working Ozaukee County.

Part of Ozaukee County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.