Wisconsin Well Data › Sheboygan County › Greenbush (53026)
Greenbush, WI (53026): well depth, water level & drilling cost
✓ 381 WI DNR records · Sheboygan County
Pull every recorded well near a Greenbush (53026) address — $49
How deep are wells in and around Greenbush (53026), Wisconsin?
The median drilled well depth in and around Greenbush (53026) is 186 ft, based on 205 wells with recorded depths in the state WI DNR database. Half fall between 142 ft and 240 ft; 90% are shallower than 305 ft.
How much does it cost to drill a well in and around Greenbush (53026)?
Applying published per-foot rates to the local median depth of 186 ft: drilling and casing alone typically runs $4,650–$12,090; a complete system including pump, pressure tank, and hookup typically runs $11,160–$18,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Greenbush (53026)?
The median static water level is 104 ft below ground surface (middle half of wells: 45 ft–145 ft), from 204 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Sheboygan County.
Part of Sheboygan County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.