⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Sheboygan County › Kohler (53044)

Kohler, WI (53044): well depth, water level & drilling cost

✓ 571 WI DNR records · Sheboygan County

280 ftmedian well depth
162 ft–342 fttypical depth range
57 ftmedian static water level
20 gpmmedian yield (172 tests)

Pull every recorded well near a Kohler (53044) address — $49

How deep are wells in and around Kohler (53044), Wisconsin?

The median drilled well depth in and around Kohler (53044) is 280 ft, based on 179 wells with recorded depths in the state WI DNR database. Half fall between 162 ft and 342 ft; 90% are shallower than 362 ft.

How much does it cost to drill a well in and around Kohler (53044)?

Applying published per-foot rates to the local median depth of 280 ft: drilling and casing alone typically runs $7,000–$18,200; a complete system including pump, pressure tank, and hookup typically runs $16,800–$28,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kohler (53044)?

The median static water level is 57 ft below ground surface (middle half of wells: 41 ft–72 ft), from 175 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 8 100–150 ft 31 150–200 ft 20 200–300 ft 34 300–400 ft 74 400–600 ft 11 600+ ft 0
Looking at a specific property in Kohler (53044)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kohler (53044)

Free. Goes to licensed drillers working Sheboygan County.

Part of Sheboygan County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.