⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Waukesha County › Lannon (53046)

Lannon, WI (53046): well depth, water level & drilling cost

✓ 1,645 WI DNR records · Waukesha County

185 ftmedian well depth
161 ft–208 fttypical depth range
46 ftmedian static water level
20 gpmmedian yield (419 tests)

Pull every recorded well near a Lannon (53046) address — $49

How deep are wells in and around Lannon (53046), Wisconsin?

The median drilled well depth in and around Lannon (53046) is 185 ft, based on 439 wells with recorded depths in the state WI DNR database. Half fall between 161 ft and 208 ft; 90% are shallower than 270 ft.

How much does it cost to drill a well in and around Lannon (53046)?

Applying published per-foot rates to the local median depth of 185 ft: drilling and casing alone typically runs $4,625–$12,025; a complete system including pump, pressure tank, and hookup typically runs $11,100–$18,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lannon (53046)?

The median static water level is 46 ft below ground surface (middle half of wells: 23 ft–80 ft), from 430 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 20 100–150 ft 73 150–200 ft 181 200–300 ft 123 300–400 ft 30 400–600 ft 1 600+ ft 8
Looking at a specific property in Lannon (53046)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lannon (53046)

Free. Goes to licensed drillers working Waukesha County.

Part of Waukesha County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.