⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Fond Du Lac County › Lomira (53048)

Lomira, WI (53048): well depth, water level & drilling cost

✓ 552 WI DNR records · Fond Du Lac County

180 ftmedian well depth
138 ft–225 fttypical depth range
50 ftmedian static water level
15 gpmmedian yield (247 tests)

Pull every recorded well near a Lomira (53048) address — $49

How deep are wells in and around Lomira (53048), Wisconsin?

The median drilled well depth in and around Lomira (53048) is 180 ft, based on 256 wells with recorded depths in the state WI DNR database. Half fall between 138 ft and 225 ft; 90% are shallower than 274 ft.

How much does it cost to drill a well in and around Lomira (53048)?

Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Lomira (53048)?

The median static water level is 50 ft below ground surface (middle half of wells: 27 ft–75 ft), from 249 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 11 100–150 ft 70 150–200 ft 74 200–300 ft 72 300–400 ft 3 400–600 ft 2 600+ ft 20
Looking at a specific property in Lomira (53048)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Lomira (53048)

Free. Goes to licensed drillers working Fond Du Lac County.

Part of Fond Du Lac County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.