Wisconsin Well Data › Waukesha County › Menomonee Falls (53052)
Menomonee Falls, WI (53052): well depth, water level & drilling cost
✓ 598 WI DNR records · Waukesha County
Pull every recorded well near a Menomonee Falls (53052) address — $49
How deep are wells in and around Menomonee Falls (53052), Wisconsin?
The median drilled well depth in and around Menomonee Falls (53052) is 201 ft, based on 54 wells with recorded depths in the state WI DNR database. Half fall between 148 ft and 264 ft; 90% are shallower than 357 ft.
How much does it cost to drill a well in and around Menomonee Falls (53052)?
Applying published per-foot rates to the local median depth of 201 ft: drilling and casing alone typically runs $5,025–$13,065; a complete system including pump, pressure tank, and hookup typically runs $12,060–$20,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Menomonee Falls (53052)?
The median static water level is 27 ft below ground surface (middle half of wells: 19 ft–51 ft), from 44 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Waukesha County.
Part of Waukesha County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.