⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Waukesha County › Nashotah (53058)

Nashotah, WI (53058): well depth, water level & drilling cost

✓ 1,269 WI DNR records · Waukesha County

96 ftmedian well depth
59 ft–162 fttypical depth range
38 ftmedian static water level
20 gpmmedian yield (786 tests)

Pull every recorded well near a Nashotah (53058) address — $49

How deep are wells in and around Nashotah (53058), Wisconsin?

The median drilled well depth in and around Nashotah (53058) is 96 ft, based on 791 wells with recorded depths in the state WI DNR database. Half fall between 59 ft and 162 ft; 90% are shallower than 231 ft.

How much does it cost to drill a well in and around Nashotah (53058)?

Applying published per-foot rates to the local median depth of 96 ft: drilling and casing alone typically runs $2,400–$6,240; a complete system including pump, pressure tank, and hookup typically runs $5,760–$9,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Nashotah (53058)?

The median static water level is 38 ft below ground surface (middle half of wells: 20 ft–57 ft), from 789 measurements.

Drilled depth distribution

0–50 ft 133 50–100 ft 282 100–150 ft 150 150–200 ft 83 200–300 ft 109 300–400 ft 25 400–600 ft 8 600+ ft 1
Looking at a specific property in Nashotah (53058)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Nashotah (53058)

Free. Goes to licensed drillers working Waukesha County.

Part of Waukesha County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.