⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Washington County › Newburg (53060)

Newburg, WI (53060): well depth, water level & drilling cost

✓ 2,044 WI DNR records · Washington County

167 ftmedian well depth
140 ft–210 fttypical depth range
33 ftmedian static water level
15 gpmmedian yield (1,087 tests)

Pull every recorded well near a Newburg (53060) address — $49

How deep are wells in and around Newburg (53060), Wisconsin?

The median drilled well depth in and around Newburg (53060) is 167 ft, based on 1,092 wells with recorded depths in the state WI DNR database. Half fall between 140 ft and 210 ft; 90% are shallower than 275 ft.

How much does it cost to drill a well in and around Newburg (53060)?

Applying published per-foot rates to the local median depth of 167 ft: drilling and casing alone typically runs $4,175–$10,855; a complete system including pump, pressure tank, and hookup typically runs $10,020–$16,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Newburg (53060)?

The median static water level is 33 ft below ground surface (middle half of wells: 20 ft–48 ft), from 1,090 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 83 100–150 ft 307 150–200 ft 332 200–300 ft 286 300–400 ft 80 400–600 ft 2 600+ ft 1
Looking at a specific property in Newburg (53060)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Newburg (53060)

Free. Goes to licensed drillers working Washington County.

Part of Washington County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.