⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Waukesha County › Pewaukee (53072)

Pewaukee, WI (53072): well depth, water level & drilling cost

✓ 2,190 WI DNR records · Waukesha County

184 ftmedian well depth
142 ft–233 fttypical depth range
46 ftmedian static water level
20 gpmmedian yield (901 tests)

Pull every recorded well near a Pewaukee (53072) address — $49

How deep are wells in and around Pewaukee (53072), Wisconsin?

The median drilled well depth in and around Pewaukee (53072) is 184 ft, based on 926 wells with recorded depths in the state WI DNR database. Half fall between 142 ft and 233 ft; 90% are shallower than 318 ft.

How much does it cost to drill a well in and around Pewaukee (53072)?

Applying published per-foot rates to the local median depth of 184 ft: drilling and casing alone typically runs $4,600–$11,960; a complete system including pump, pressure tank, and hookup typically runs $11,040–$18,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pewaukee (53072)?

The median static water level is 46 ft below ground surface (middle half of wells: 22 ft–90 ft), from 911 measurements.

Drilled depth distribution

0–50 ft 14 50–100 ft 73 100–150 ft 214 150–200 ft 217 200–300 ft 295 300–400 ft 57 400–600 ft 38 600+ ft 18
Looking at a specific property in Pewaukee (53072)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pewaukee (53072)

Free. Goes to licensed drillers working Waukesha County.

Part of Waukesha County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.