Wisconsin Well Data › Washington County › Richfield (53076)
Richfield, WI (53076): well depth, water level & drilling cost
✓ 1,321 WI DNR records · Washington County
Pull every recorded well near a Richfield (53076) address — $49
How deep are wells in and around Richfield (53076), Wisconsin?
The median drilled well depth in and around Richfield (53076) is 136 ft, based on 791 wells with recorded depths in the state WI DNR database. Half fall between 89 ft and 191 ft; 90% are shallower than 260 ft.
How much does it cost to drill a well in and around Richfield (53076)?
Applying published per-foot rates to the local median depth of 136 ft: drilling and casing alone typically runs $3,400–$8,840; a complete system including pump, pressure tank, and hookup typically runs $8,160–$13,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Richfield (53076)?
The median static water level is 32 ft below ground surface (middle half of wells: 18 ft–55 ft), from 787 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Washington County.
Part of Washington County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.