⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Ozaukee County › Saukville (53080)

Saukville, WI (53080): well depth, water level & drilling cost

✓ 796 WI DNR records · Ozaukee County

165 ftmedian well depth
129 ft–202 fttypical depth range
29 ftmedian static water level
15 gpmmedian yield (301 tests)

Pull every recorded well near a Saukville (53080) address — $49

How deep are wells in and around Saukville (53080), Wisconsin?

The median drilled well depth in and around Saukville (53080) is 165 ft, based on 306 wells with recorded depths in the state WI DNR database. Half fall between 129 ft and 202 ft; 90% are shallower than 225 ft.

How much does it cost to drill a well in and around Saukville (53080)?

Applying published per-foot rates to the local median depth of 165 ft: drilling and casing alone typically runs $4,125–$10,725; a complete system including pump, pressure tank, and hookup typically runs $9,900–$16,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Saukville (53080)?

The median static water level is 29 ft below ground surface (middle half of wells: 19 ft–40 ft), from 303 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 24 100–150 ft 87 150–200 ft 104 200–300 ft 78 300–400 ft 7 400–600 ft 5 600+ ft 0
Looking at a specific property in Saukville (53080)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Saukville (53080)

Free. Goes to licensed drillers working Ozaukee County.

Part of Ozaukee County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.