⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Washington County › Slinger (53086)

Slinger, WI (53086): well depth, water level & drilling cost

✓ 2,582 WI DNR records · Washington County

160 ftmedian well depth
106 ft–206 fttypical depth range
50 ftmedian static water level
15 gpmmedian yield (1,413 tests)

Pull every recorded well near a Slinger (53086) address — $49

How deep are wells in and around Slinger (53086), Wisconsin?

The median drilled well depth in and around Slinger (53086) is 160 ft, based on 1,425 wells with recorded depths in the state WI DNR database. Half fall between 106 ft and 206 ft; 90% are shallower than 265 ft.

How much does it cost to drill a well in and around Slinger (53086)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Slinger (53086)?

The median static water level is 50 ft below ground surface (middle half of wells: 25 ft–85 ft), from 1,420 measurements.

Drilled depth distribution

0–50 ft 34 50–100 ft 268 100–150 ft 346 150–200 ft 361 200–300 ft 323 300–400 ft 83 400–600 ft 8 600+ ft 2
Looking at a specific property in Slinger (53086)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Slinger (53086)

Free. Goes to licensed drillers working Washington County.

Part of Washington County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.