Wisconsin Well Data › Calumet County › Stockbridge (53088)
Stockbridge, WI (53088): well depth, water level & drilling cost
✓ 518 WI DNR records · Calumet County
Pull every recorded well near a Stockbridge (53088) address — $49
How deep are wells in and around Stockbridge (53088), Wisconsin?
The median drilled well depth in and around Stockbridge (53088) is 162 ft, based on 308 wells with recorded depths in the state WI DNR database. Half fall between 117 ft and 245 ft; 90% are shallower than 380 ft.
How much does it cost to drill a well in and around Stockbridge (53088)?
Applying published per-foot rates to the local median depth of 162 ft: drilling and casing alone typically runs $4,050–$10,530; a complete system including pump, pressure tank, and hookup typically runs $9,720–$16,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Stockbridge (53088)?
The median static water level is 43 ft below ground surface (middle half of wells: 20 ft–65 ft), from 308 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Calumet County.
Part of Calumet County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.