Wisconsin Well Data › Washington County › West Bend (53090)
West Bend, WI (53090): well depth, water level & drilling cost
✓ 1,508 WI DNR records · Washington County
Pull every recorded well near a West Bend (53090) address — $49
How deep are wells in and around West Bend (53090), Wisconsin?
The median drilled well depth in and around West Bend (53090) is 188 ft, based on 666 wells with recorded depths in the state WI DNR database. Half fall between 145 ft and 232 ft; 90% are shallower than 285 ft.
How much does it cost to drill a well in and around West Bend (53090)?
Applying published per-foot rates to the local median depth of 188 ft: drilling and casing alone typically runs $4,700–$12,220; a complete system including pump, pressure tank, and hookup typically runs $11,280–$18,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around West Bend (53090)?
The median static water level is 45 ft below ground surface (middle half of wells: 25 ft–75 ft), from 657 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Washington County.
Part of Washington County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.