⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Ozaukee County › Mequon (53092)

Mequon, WI (53092): well depth, water level & drilling cost

✓ 3,848 WI DNR records · Ozaukee County

235 ftmedian well depth
182 ft–353 fttypical depth range
77 ftmedian static water level
15 gpmmedian yield (909 tests)

Pull every recorded well near a Mequon (53092) address — $49

How deep are wells in and around Mequon (53092), Wisconsin?

The median drilled well depth in and around Mequon (53092) is 235 ft, based on 939 wells with recorded depths in the state WI DNR database. Half fall between 182 ft and 353 ft; 90% are shallower than 541 ft.

How much does it cost to drill a well in and around Mequon (53092)?

Applying published per-foot rates to the local median depth of 235 ft: drilling and casing alone typically runs $5,875–$15,275; a complete system including pump, pressure tank, and hookup typically runs $14,100–$23,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mequon (53092)?

The median static water level is 77 ft below ground surface (middle half of wells: 42 ft–121 ft), from 928 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 16 100–150 ft 101 150–200 ft 183 200–300 ft 341 300–400 ft 103 400–600 ft 146 600+ ft 48
Looking at a specific property in Mequon (53092)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mequon (53092)

Free. Goes to licensed drillers working Ozaukee County.

Part of Ozaukee County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.