⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Kenosha County › Bassett (53101)

Bassett, WI (53101): well depth, water level & drilling cost

✓ 481 WI DNR records · Kenosha County

89 ftmedian well depth
78 ft–100 fttypical depth range
32 ftmedian static water level
15 gpmmedian yield (329 tests)

Pull every recorded well near a Bassett (53101) address — $49

How deep are wells in and around Bassett (53101), Wisconsin?

The median drilled well depth in and around Bassett (53101) is 89 ft, based on 332 wells with recorded depths in the state WI DNR database. Half fall between 78 ft and 100 ft; 90% are shallower than 158 ft.

How much does it cost to drill a well in and around Bassett (53101)?

Applying published per-foot rates to the local median depth of 89 ft: drilling and casing alone typically runs $2,225–$5,785; a complete system including pump, pressure tank, and hookup typically runs $5,340–$8,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Bassett (53101)?

The median static water level is 32 ft below ground surface (middle half of wells: 18 ft–42 ft), from 331 measurements.

Drilled depth distribution

0–50 ft 28 50–100 ft 212 100–150 ft 55 150–200 ft 26 200–300 ft 9 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Bassett (53101)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bassett (53101)

Free. Goes to licensed drillers working Kenosha County.

Part of Kenosha County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.