Wisconsin Well Data › Kenosha County › Benet Lake (53102)
Benet Lake, WI (53102): well depth, water level & drilling cost
✓ 1,221 WI DNR records · Kenosha County
Pull every recorded well near a Benet Lake (53102) address — $49
How deep are wells in and around Benet Lake (53102), Wisconsin?
The median drilled well depth in and around Benet Lake (53102) is 153 ft, based on 814 wells with recorded depths in the state WI DNR database. Half fall between 121 ft and 177 ft; 90% are shallower than 256 ft.
How much does it cost to drill a well in and around Benet Lake (53102)?
Applying published per-foot rates to the local median depth of 153 ft: drilling and casing alone typically runs $3,825–$9,945; a complete system including pump, pressure tank, and hookup typically runs $9,180–$15,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Benet Lake (53102)?
The median static water level is 87 ft below ground surface (middle half of wells: 65 ft–97 ft), from 813 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kenosha County.
Part of Kenosha County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.