⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Waukesha County › Big Bend (53103)

Big Bend, WI (53103): well depth, water level & drilling cost

✓ 4,129 WI DNR records · Waukesha County

115 ftmedian well depth
85 ft–163 fttypical depth range
32 ftmedian static water level
20 gpmmedian yield (2,041 tests)

Pull every recorded well near a Big Bend (53103) address — $49

How deep are wells in and around Big Bend (53103), Wisconsin?

The median drilled well depth in and around Big Bend (53103) is 115 ft, based on 2,060 wells with recorded depths in the state WI DNR database. Half fall between 85 ft and 163 ft; 90% are shallower than 222 ft.

How much does it cost to drill a well in and around Big Bend (53103)?

Applying published per-foot rates to the local median depth of 121 ft: drilling and casing alone typically runs $3,025–$7,865; a complete system including pump, pressure tank, and hookup typically runs $7,260–$12,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Big Bend (53103)?

The median static water level is 32 ft below ground surface (middle half of wells: 19 ft–55 ft), from 2,053 measurements.

Drilled depth distribution

0–50 ft 28 50–100 ft 719 100–150 ft 690 150–200 ft 320 200–300 ft 241 300–400 ft 39 400–600 ft 23 600+ ft 0
Looking at a specific property in Big Bend (53103)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Big Bend (53103)

Free. Goes to licensed drillers working Waukesha County.

Part of Waukesha County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.