⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Milwaukee County › Cudahy (53110)

Cudahy, WI (53110): well depth, water level & drilling cost

✓ 138 WI DNR records · Milwaukee County

142 ftmedian well depth
139 ft–143 fttypical depth range
25 ftmedian static water level
20 gpmmedian yield (3 tests)

Pull every recorded well near a Cudahy (53110) address — $49

How deep are wells in and around Cudahy (53110), Wisconsin?

The median drilled well depth in and around Cudahy (53110) is 142 ft, based on 3 wells with recorded depths in the state WI DNR database. Half fall between 139 ft and 143 ft; 90% are shallower than 143 ft.

How much does it cost to drill a well in and around Cudahy (53110)?

Applying published per-foot rates to the local median depth of 142 ft: drilling and casing alone typically runs $3,550–$9,230; a complete system including pump, pressure tank, and hookup typically runs $8,520–$14,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Cudahy (53110)?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–34 ft), from 3 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 0 100–150 ft 3 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Cudahy (53110)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Cudahy (53110)

Free. Goes to licensed drillers working Milwaukee County.

Part of Milwaukee County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.