⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Walworth County › Darien (53114)

Darien, WI (53114): well depth, water level & drilling cost

✓ 551 WI DNR records · Walworth County

120 ftmedian well depth
87 ft–162 fttypical depth range
47 ftmedian static water level
15 gpmmedian yield (254 tests)

Pull every recorded well near a Darien (53114) address — $49

How deep are wells in and around Darien (53114), Wisconsin?

The median drilled well depth in and around Darien (53114) is 120 ft, based on 254 wells with recorded depths in the state WI DNR database. Half fall between 87 ft and 162 ft; 90% are shallower than 225 ft.

How much does it cost to drill a well in and around Darien (53114)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Darien (53114)?

The median static water level is 47 ft below ground surface (middle half of wells: 30 ft–70 ft), from 254 measurements.

Drilled depth distribution

0–50 ft 10 50–100 ft 75 100–150 ft 88 150–200 ft 36 200–300 ft 31 300–400 ft 10 400–600 ft 3 600+ ft 1
Looking at a specific property in Darien (53114)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Darien (53114)

Free. Goes to licensed drillers working Walworth County.

Part of Walworth County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.