⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Walworth County › Elkhorn (53121)

Elkhorn, WI (53121): well depth, water level & drilling cost

✓ 3,747 WI DNR records · Walworth County

89 ftmedian well depth
62 ft–125 fttypical depth range
35 ftmedian static water level
15 gpmmedian yield (2,191 tests)

Pull every recorded well near a Elkhorn (53121) address — $49

How deep are wells in and around Elkhorn (53121), Wisconsin?

The median drilled well depth in and around Elkhorn (53121) is 89 ft, based on 2,224 wells with recorded depths in the state WI DNR database. Half fall between 62 ft and 125 ft; 90% are shallower than 216 ft.

How much does it cost to drill a well in and around Elkhorn (53121)?

Applying published per-foot rates to the local median depth of 96 ft: drilling and casing alone typically runs $2,400–$6,240; a complete system including pump, pressure tank, and hookup typically runs $5,760–$9,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Elkhorn (53121)?

The median static water level is 35 ft below ground surface (middle half of wells: 21 ft–58 ft), from 2,208 measurements.

Drilled depth distribution

0–50 ft 287 50–100 ft 1,038 100–150 ft 490 150–200 ft 159 200–300 ft 147 300–400 ft 81 400–600 ft 21 600+ ft 1
Looking at a specific property in Elkhorn (53121)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Elkhorn (53121)

Free. Goes to licensed drillers working Walworth County.

Part of Walworth County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.