⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Walworth County › Fontana (53125)

Fontana, WI (53125): well depth, water level & drilling cost

✓ 308 WI DNR records · Walworth County

168 ftmedian well depth
86 ft–222 fttypical depth range
80 ftmedian static water level
15 gpmmedian yield (183 tests)

Pull every recorded well near a Fontana (53125) address — $49

How deep are wells in and around Fontana (53125), Wisconsin?

The median drilled well depth in and around Fontana (53125) is 168 ft, based on 184 wells with recorded depths in the state WI DNR database. Half fall between 86 ft and 222 ft; 90% are shallower than 338 ft.

How much does it cost to drill a well in and around Fontana (53125)?

Applying published per-foot rates to the local median depth of 168 ft: drilling and casing alone typically runs $4,200–$10,920; a complete system including pump, pressure tank, and hookup typically runs $10,080–$16,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Fontana (53125)?

The median static water level is 80 ft below ground surface (middle half of wells: 45 ft–120 ft), from 184 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 55 100–150 ft 24 150–200 ft 41 200–300 ft 37 300–400 ft 13 400–600 ft 13 600+ ft 1
Looking at a specific property in Fontana (53125)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Fontana (53125)

Free. Goes to licensed drillers working Walworth County.

Part of Walworth County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.