⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Walworth County › Genoa City (53128)

Genoa City, WI (53128): well depth, water level & drilling cost

✓ 351 WI DNR records · Walworth County

79 ftmedian well depth
50 ft–107 fttypical depth range
24 ftmedian static water level
12 gpmmedian yield (196 tests)

Pull every recorded well near a Genoa City (53128) address — $49

How deep are wells in and around Genoa City (53128), Wisconsin?

The median drilled well depth in and around Genoa City (53128) is 79 ft, based on 199 wells with recorded depths in the state WI DNR database. Half fall between 50 ft and 107 ft; 90% are shallower than 139 ft.

How much does it cost to drill a well in and around Genoa City (53128)?

Applying published per-foot rates to the local median depth of 79 ft: drilling and casing alone typically runs $1,975–$5,135; a complete system including pump, pressure tank, and hookup typically runs $4,740–$7,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Genoa City (53128)?

The median static water level is 24 ft below ground surface (middle half of wells: 12 ft–44 ft), from 199 measurements.

Drilled depth distribution

0–50 ft 48 50–100 ft 91 100–150 ft 46 150–200 ft 11 200–300 ft 2 300–400 ft 0 400–600 ft 0 600+ ft 1
Looking at a specific property in Genoa City (53128)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Genoa City (53128)

Free. Goes to licensed drillers working Walworth County.

Part of Walworth County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.