⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Kenosha County › Kenosha (53140)

Kenosha, WI (53140): well depth, water level & drilling cost

✓ 218 WI DNR records · Kenosha County

134 ftmedian well depth
123 ft–146 fttypical depth range
30 ftmedian static water level
10 gpmmedian yield (6 tests)

Pull every recorded well near a Kenosha (53140) address — $49

How deep are wells in and around Kenosha (53140), Wisconsin?

The median drilled well depth in and around Kenosha (53140) is 134 ft, based on 7 wells with recorded depths in the state WI DNR database. Half fall between 123 ft and 146 ft; 90% are shallower than 188 ft.

How much does it cost to drill a well in and around Kenosha (53140)?

Applying published per-foot rates to the local median depth of 134 ft: drilling and casing alone typically runs $3,350–$8,710; a complete system including pump, pressure tank, and hookup typically runs $8,040–$13,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kenosha (53140)?

The median static water level is 30 ft below ground surface (middle half of wells: 25 ft–52 ft), from 7 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 1 100–150 ft 5 150–200 ft 0 200–300 ft 1 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Kenosha (53140)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kenosha (53140)

Free. Goes to licensed drillers working Kenosha County.

Part of Kenosha County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.