⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Kenosha County › Kenosha (53142)

Kenosha, WI (53142): well depth, water level & drilling cost

✓ 700 WI DNR records · Kenosha County

162 ftmedian well depth
118 ft–186 fttypical depth range
50 ftmedian static water level
13 gpmmedian yield (60 tests)

Pull every recorded well near a Kenosha (53142) address — $49

How deep are wells in and around Kenosha (53142), Wisconsin?

The median drilled well depth in and around Kenosha (53142) is 162 ft, based on 71 wells with recorded depths in the state WI DNR database. Half fall between 118 ft and 186 ft; 90% are shallower than 220 ft.

How much does it cost to drill a well in and around Kenosha (53142)?

Applying published per-foot rates to the local median depth of 162 ft: drilling and casing alone typically runs $4,050–$10,530; a complete system including pump, pressure tank, and hookup typically runs $9,720–$16,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Kenosha (53142)?

The median static water level is 50 ft below ground surface (middle half of wells: 37 ft–64 ft), from 67 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 10 100–150 ft 18 150–200 ft 30 200–300 ft 11 300–400 ft 1 400–600 ft 1 600+ ft 0
Looking at a specific property in Kenosha (53142)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Kenosha (53142)

Free. Goes to licensed drillers working Kenosha County.

Part of Kenosha County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.