⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Jefferson County › Palmyra (53156)

Palmyra, WI (53156): well depth, water level & drilling cost

✓ 1,052 WI DNR records · Jefferson County

132 ftmedian well depth
90 ft–180 fttypical depth range
45 ftmedian static water level
20 gpmmedian yield (557 tests)

Pull every recorded well near a Palmyra (53156) address — $49

How deep are wells in and around Palmyra (53156), Wisconsin?

The median drilled well depth in and around Palmyra (53156) is 132 ft, based on 583 wells with recorded depths in the state WI DNR database. Half fall between 90 ft and 180 ft; 90% are shallower than 221 ft.

How much does it cost to drill a well in and around Palmyra (53156)?

Applying published per-foot rates to the local median depth of 132 ft: drilling and casing alone typically runs $3,300–$8,580; a complete system including pump, pressure tank, and hookup typically runs $7,920–$13,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Palmyra (53156)?

The median static water level is 45 ft below ground surface (middle half of wells: 17 ft–74 ft), from 574 measurements.

Drilled depth distribution

0–50 ft 18 50–100 ft 159 100–150 ft 182 150–200 ft 123 200–300 ft 86 300–400 ft 13 400–600 ft 2 600+ ft 0
Looking at a specific property in Palmyra (53156)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Palmyra (53156)

Free. Goes to licensed drillers working Jefferson County.

Part of Jefferson County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.