⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Walworth County › Pell Lake (53157)

Pell Lake, WI (53157): well depth, water level & drilling cost

✓ 688 WI DNR records · Walworth County

64 ftmedian well depth
45 ft–88 fttypical depth range
20 ftmedian static water level
12 gpmmedian yield (389 tests)

Pull every recorded well near a Pell Lake (53157) address — $49

How deep are wells in and around Pell Lake (53157), Wisconsin?

The median drilled well depth in and around Pell Lake (53157) is 64 ft, based on 396 wells with recorded depths in the state WI DNR database. Half fall between 45 ft and 88 ft; 90% are shallower than 125 ft.

How much does it cost to drill a well in and around Pell Lake (53157)?

Applying published per-foot rates to the local median depth of 64 ft: drilling and casing alone typically runs $1,600–$4,160; a complete system including pump, pressure tank, and hookup typically runs $3,840–$6,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pell Lake (53157)?

The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–33 ft), from 395 measurements.

Drilled depth distribution

0–50 ft 124 50–100 ft 196 100–150 ft 47 150–200 ft 17 200–300 ft 8 300–400 ft 3 400–600 ft 0 600+ ft 1
Looking at a specific property in Pell Lake (53157)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pell Lake (53157)

Free. Goes to licensed drillers working Walworth County.

Part of Walworth County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.