Wisconsin Well Data › Kenosha County › Powers Lake (53159)
Powers Lake, WI (53159): well depth, water level & drilling cost
✓ 1,093 WI DNR records · Kenosha County
Pull every recorded well near a Powers Lake (53159) address — $49
How deep are wells in and around Powers Lake (53159), Wisconsin?
The median drilled well depth in and around Powers Lake (53159) is 87 ft, based on 819 wells with recorded depths in the state WI DNR database. Half fall between 59 ft and 132 ft; 90% are shallower than 165 ft.
How much does it cost to drill a well in and around Powers Lake (53159)?
Applying published per-foot rates to the local median depth of 87 ft: drilling and casing alone typically runs $2,175–$5,655; a complete system including pump, pressure tank, and hookup typically runs $5,220–$8,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Powers Lake (53159)?
The median static water level is 30 ft below ground surface (middle half of wells: 20 ft–40 ft), from 819 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kenosha County.
Part of Kenosha County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.