Wisconsin Well Data › Kenosha County › Silver Lake (53170)
Silver Lake, WI (53170): well depth, water level & drilling cost
✓ 914 WI DNR records · Kenosha County
Pull every recorded well near a Silver Lake (53170) address — $49
How deep are wells in and around Silver Lake (53170), Wisconsin?
The median drilled well depth in and around Silver Lake (53170) is 62 ft, based on 547 wells with recorded depths in the state WI DNR database. Half fall between 50 ft and 83 ft; 90% are shallower than 129 ft.
How much does it cost to drill a well in and around Silver Lake (53170)?
Applying published per-foot rates to the local median depth of 62 ft: drilling and casing alone typically runs $1,550–$4,030; a complete system including pump, pressure tank, and hookup typically runs $3,720–$6,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Silver Lake (53170)?
The median static water level is 10 ft below ground surface (middle half of wells: 8 ft–16 ft), from 544 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Kenosha County.
Part of Kenosha County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.