⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Walworth County › Walworth (53184)

Walworth, WI (53184): well depth, water level & drilling cost

✓ 384 WI DNR records · Walworth County

130 ftmedian well depth
96 ft–172 fttypical depth range
65 ftmedian static water level
15 gpmmedian yield (186 tests)

Pull every recorded well near a Walworth (53184) address — $49

How deep are wells in and around Walworth (53184), Wisconsin?

The median drilled well depth in and around Walworth (53184) is 130 ft, based on 189 wells with recorded depths in the state WI DNR database. Half fall between 96 ft and 172 ft; 90% are shallower than 237 ft.

How much does it cost to drill a well in and around Walworth (53184)?

Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Walworth (53184)?

The median static water level is 65 ft below ground surface (middle half of wells: 34 ft–81 ft), from 188 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 46 100–150 ft 60 150–200 ft 47 200–300 ft 20 300–400 ft 4 400–600 ft 2 600+ ft 1
Looking at a specific property in Walworth (53184)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Walworth (53184)

Free. Goes to licensed drillers working Walworth County.

Part of Walworth County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.