Wisconsin Well Data › Walworth County › Whitewater (53190)
Whitewater, WI (53190): well depth, water level & drilling cost
✓ 1,930 WI DNR records · Walworth County
Pull every recorded well near a Whitewater (53190) address — $49
How deep are wells in and around Whitewater (53190), Wisconsin?
The median drilled well depth in and around Whitewater (53190) is 115 ft, based on 984 wells with recorded depths in the state WI DNR database. Half fall between 75 ft and 150 ft; 90% are shallower than 202 ft.
How much does it cost to drill a well in and around Whitewater (53190)?
Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Whitewater (53190)?
The median static water level is 38 ft below ground surface (middle half of wells: 23 ft–63 ft), from 977 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Walworth County.
Part of Walworth County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.