Wisconsin Well Data › Walworth County › Williams Bay (53191)
Williams Bay, WI (53191): well depth, water level & drilling cost
✓ 1,099 WI DNR records · Walworth County
Pull every recorded well near a Williams Bay (53191) address — $49
How deep are wells in and around Williams Bay (53191), Wisconsin?
The median drilled well depth in and around Williams Bay (53191) is 120 ft, based on 524 wells with recorded depths in the state WI DNR database. Half fall between 86 ft and 161 ft; 90% are shallower than 235 ft.
How much does it cost to drill a well in and around Williams Bay (53191)?
Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Williams Bay (53191)?
The median static water level is 70 ft below ground surface (middle half of wells: 35 ft–94 ft), from 517 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Walworth County.
Part of Walworth County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.