⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Kenosha County › Wilmot (53192)

Wilmot, WI (53192): well depth, water level & drilling cost

✓ 418 WI DNR records · Kenosha County

94 ftmedian well depth
65 ft–127 fttypical depth range
29 ftmedian static water level
15 gpmmedian yield (219 tests)

Pull every recorded well near a Wilmot (53192) address — $49

How deep are wells in and around Wilmot (53192), Wisconsin?

The median drilled well depth in and around Wilmot (53192) is 94 ft, based on 220 wells with recorded depths in the state WI DNR database. Half fall between 65 ft and 127 ft; 90% are shallower than 170 ft.

How much does it cost to drill a well in and around Wilmot (53192)?

Applying published per-foot rates to the local median depth of 94 ft: drilling and casing alone typically runs $2,350–$6,110; a complete system including pump, pressure tank, and hookup typically runs $5,640–$9,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wilmot (53192)?

The median static water level is 29 ft below ground surface (middle half of wells: 12 ft–55 ft), from 219 measurements.

Drilled depth distribution

0–50 ft 17 50–100 ft 103 100–150 ft 64 150–200 ft 26 200–300 ft 10 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Wilmot (53192)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wilmot (53192)

Free. Goes to licensed drillers working Kenosha County.

Part of Kenosha County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.