⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Walworth County › Zenda (53195)

Zenda, WI (53195): well depth, water level & drilling cost

✓ 550 WI DNR records · Walworth County

119 ftmedian well depth
93 ft–177 fttypical depth range
60 ftmedian static water level
15 gpmmedian yield (331 tests)

Pull every recorded well near a Zenda (53195) address — $49

How deep are wells in and around Zenda (53195), Wisconsin?

The median drilled well depth in and around Zenda (53195) is 119 ft, based on 335 wells with recorded depths in the state WI DNR database. Half fall between 93 ft and 177 ft; 90% are shallower than 261 ft.

How much does it cost to drill a well in and around Zenda (53195)?

Applying published per-foot rates to the local median depth of 119 ft: drilling and casing alone typically runs $2,975–$7,735; a complete system including pump, pressure tank, and hookup typically runs $7,140–$11,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Zenda (53195)?

The median static water level is 60 ft below ground surface (middle half of wells: 43 ft–87 ft), from 331 measurements.

Drilled depth distribution

0–50 ft 16 50–100 ft 91 100–150 ft 123 150–200 ft 39 200–300 ft 42 300–400 ft 11 400–600 ft 7 600+ ft 6
Looking at a specific property in Zenda (53195)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Zenda (53195)

Free. Goes to licensed drillers working Walworth County.

Part of Walworth County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.