⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Lafayette County › Argyle (53504)

Argyle, WI (53504): well depth, water level & drilling cost

✓ 558 WI DNR records · Lafayette County

202 ftmedian well depth
151 ft–260 fttypical depth range
103 ftmedian static water level
20 gpmmedian yield (228 tests)

Pull every recorded well near a Argyle (53504) address — $49

How deep are wells in and around Argyle (53504), Wisconsin?

The median drilled well depth in and around Argyle (53504) is 202 ft, based on 242 wells with recorded depths in the state WI DNR database. Half fall between 151 ft and 260 ft; 90% are shallower than 304 ft.

How much does it cost to drill a well in and around Argyle (53504)?

Applying published per-foot rates to the local median depth of 202 ft: drilling and casing alone typically runs $5,050–$13,130; a complete system including pump, pressure tank, and hookup typically runs $12,120–$20,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Argyle (53504)?

The median static water level is 103 ft below ground surface (middle half of wells: 56 ft–147 ft), from 260 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 7 100–150 ft 45 150–200 ft 50 200–300 ft 107 300–400 ft 29 400–600 ft 4 600+ ft 0
Looking at a specific property in Argyle (53504)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Argyle (53504)

Free. Goes to licensed drillers working Lafayette County.

Part of Lafayette County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.