⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Lafayette County › Belmont (53510)

Belmont, WI (53510): well depth, water level & drilling cost

✓ 433 WI DNR records · Lafayette County

224 ftmedian well depth
182 ft–262 fttypical depth range
106 ftmedian static water level
20 gpmmedian yield (209 tests)

Pull every recorded well near a Belmont (53510) address — $49

How deep are wells in and around Belmont (53510), Wisconsin?

The median drilled well depth in and around Belmont (53510) is 224 ft, based on 209 wells with recorded depths in the state WI DNR database. Half fall between 182 ft and 262 ft; 90% are shallower than 305 ft.

How much does it cost to drill a well in and around Belmont (53510)?

Applying published per-foot rates to the local median depth of 224 ft: drilling and casing alone typically runs $5,600–$14,560; a complete system including pump, pressure tank, and hookup typically runs $13,440–$22,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Belmont (53510)?

The median static water level is 106 ft below ground surface (middle half of wells: 63 ft–147 ft), from 209 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 1 100–150 ft 22 150–200 ft 48 200–300 ft 112 300–400 ft 24 400–600 ft 1 600+ ft 1
Looking at a specific property in Belmont (53510)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Belmont (53510)

Free. Goes to licensed drillers working Lafayette County.

Part of Lafayette County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.