Wisconsin Well Data › Green County › Blanchardville (53516)
Blanchardville, WI (53516): well depth, water level & drilling cost
✓ 772 WI DNR records · Green County
Pull every recorded well near a Blanchardville (53516) address — $49
How deep are wells in and around Blanchardville (53516), Wisconsin?
The median drilled well depth in and around Blanchardville (53516) is 220 ft, based on 461 wells with recorded depths in the state WI DNR database. Half fall between 151 ft and 260 ft; 90% are shallower than 285 ft.
How much does it cost to drill a well in and around Blanchardville (53516)?
Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Blanchardville (53516)?
The median static water level is 113 ft below ground surface (middle half of wells: 45 ft–150 ft), from 440 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Green County.
Part of Green County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.