⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Green County › Brodhead (53520)

Brodhead, WI (53520): well depth, water level & drilling cost

✓ 804 WI DNR records · Green County

115 ftmedian well depth
65 ft–153 fttypical depth range
20 ftmedian static water level
20 gpmmedian yield (550 tests)

Pull every recorded well near a Brodhead (53520) address — $49

How deep are wells in and around Brodhead (53520), Wisconsin?

The median drilled well depth in and around Brodhead (53520) is 115 ft, based on 563 wells with recorded depths in the state WI DNR database. Half fall between 65 ft and 153 ft; 90% are shallower than 195 ft.

How much does it cost to drill a well in and around Brodhead (53520)?

Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Brodhead (53520)?

The median static water level is 20 ft below ground surface (middle half of wells: 13 ft–30 ft), from 557 measurements.

Drilled depth distribution

0–50 ft 25 50–100 ft 189 100–150 ft 197 150–200 ft 107 200–300 ft 44 300–400 ft 1 400–600 ft 0 600+ ft 0
Looking at a specific property in Brodhead (53520)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Brodhead (53520)

Free. Goes to licensed drillers working Green County.

Part of Green County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.