⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dane County › Brooklyn (53521)

Brooklyn, WI (53521): well depth, water level & drilling cost

✓ 941 WI DNR records · Dane County

158 ftmedian well depth
127 ft–198 fttypical depth range
50 ftmedian static water level
20 gpmmedian yield (561 tests)

Pull every recorded well near a Brooklyn (53521) address — $49

How deep are wells in and around Brooklyn (53521), Wisconsin?

The median drilled well depth in and around Brooklyn (53521) is 158 ft, based on 565 wells with recorded depths in the state WI DNR database. Half fall between 127 ft and 198 ft; 90% are shallower than 227 ft.

How much does it cost to drill a well in and around Brooklyn (53521)?

Applying published per-foot rates to the local median depth of 158 ft: drilling and casing alone typically runs $3,950–$10,270; a complete system including pump, pressure tank, and hookup typically runs $9,480–$15,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Brooklyn (53521)?

The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–85 ft), from 565 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 32 100–150 ft 195 150–200 ft 204 200–300 ft 126 300–400 ft 7 400–600 ft 0 600+ ft 0
Looking at a specific property in Brooklyn (53521)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Brooklyn (53521)

Free. Goes to licensed drillers working Dane County.

Part of Dane County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.