Wisconsin Well Data › Jefferson County › Cambridge (53523)
Cambridge, WI (53523): well depth, water level & drilling cost
✓ 1,564 WI DNR records · Jefferson County
Pull every recorded well near a Cambridge (53523) address — $49
How deep are wells in and around Cambridge (53523), Wisconsin?
The median drilled well depth in and around Cambridge (53523) is 133 ft, based on 1,015 wells with recorded depths in the state WI DNR database. Half fall between 104 ft and 162 ft; 90% are shallower than 187 ft.
How much does it cost to drill a well in and around Cambridge (53523)?
Applying published per-foot rates to the local median depth of 133 ft: drilling and casing alone typically runs $3,325–$8,645; a complete system including pump, pressure tank, and hookup typically runs $7,980–$13,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Cambridge (53523)?
The median static water level is 28 ft below ground surface (middle half of wells: 16 ft–41 ft), from 998 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Jefferson County.
Part of Jefferson County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.