⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Rock County › Clinton (53525)

Clinton, WI (53525): well depth, water level & drilling cost

✓ 814 WI DNR records · Rock County

160 ftmedian well depth
140 ft–185 fttypical depth range
55 ftmedian static water level
18 gpmmedian yield (308 tests)

Pull every recorded well near a Clinton (53525) address — $49

How deep are wells in and around Clinton (53525), Wisconsin?

The median drilled well depth in and around Clinton (53525) is 160 ft, based on 327 wells with recorded depths in the state WI DNR database. Half fall between 140 ft and 185 ft; 90% are shallower than 240 ft.

How much does it cost to drill a well in and around Clinton (53525)?

Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Clinton (53525)?

The median static water level is 55 ft below ground surface (middle half of wells: 35 ft–70 ft), from 316 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 11 100–150 ft 117 150–200 ft 132 200–300 ft 60 300–400 ft 4 400–600 ft 1 600+ ft 1
Looking at a specific property in Clinton (53525)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Clinton (53525)

Free. Goes to licensed drillers working Rock County.

Part of Rock County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.