⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Iowa County › Cobb (53526)

Cobb, WI (53526): well depth, water level & drilling cost

✓ 147 WI DNR records · Iowa County

195 ftmedian well depth
124 ft–305 fttypical depth range
180 ftmedian static water level
15 gpmmedian yield (47 tests)

Pull every recorded well near a Cobb (53526) address — $49

How deep are wells in and around Cobb (53526), Wisconsin?

The median drilled well depth in and around Cobb (53526) is 195 ft, based on 99 wells with recorded depths in the state WI DNR database. Half fall between 124 ft and 305 ft; 90% are shallower than 346 ft.

How much does it cost to drill a well in and around Cobb (53526)?

Applying published per-foot rates to the local median depth of 195 ft: drilling and casing alone typically runs $4,875–$12,675; a complete system including pump, pressure tank, and hookup typically runs $11,700–$19,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Cobb (53526)?

The median static water level is 180 ft below ground surface (middle half of wells: 110 ft–225 ft), from 47 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 2 100–150 ft 35 150–200 ft 13 200–300 ft 21 300–400 ft 24 400–600 ft 4 600+ ft 0
Looking at a specific property in Cobb (53526)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Cobb (53526)

Free. Goes to licensed drillers working Iowa County.

Part of Iowa County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.