Wisconsin Well Data › Dane County › Cross Plains (53528)
Cross Plains, WI (53528): well depth, water level & drilling cost
✓ 1,693 WI DNR records · Dane County
Pull every recorded well near a Cross Plains (53528) address — $49
How deep are wells in and around Cross Plains (53528), Wisconsin?
The median drilled well depth in and around Cross Plains (53528) is 300 ft, based on 904 wells with recorded depths in the state WI DNR database. Half fall between 223 ft and 326 ft; 90% are shallower than 360 ft.
How much does it cost to drill a well in and around Cross Plains (53528)?
Applying published per-foot rates to the local median depth of 300 ft: drilling and casing alone typically runs $7,500–$19,500; a complete system including pump, pressure tank, and hookup typically runs $18,000–$30,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Cross Plains (53528)?
The median static water level is 168 ft below ground surface (middle half of wells: 97 ft–200 ft), from 898 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Dane County.
Part of Dane County well records.
Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.