⟁ Wisconsin Well Data field records · 2026 survey

Wisconsin Well Data › Dane County › Dane (53529)

Dane, WI (53529): well depth, water level & drilling cost

✓ 666 WI DNR records · Dane County

220 ftmedian well depth
178 ft–284 fttypical depth range
91 ftmedian static water level
20 gpmmedian yield (315 tests)

Pull every recorded well near a Dane (53529) address — $49

How deep are wells in and around Dane (53529), Wisconsin?

The median drilled well depth in and around Dane (53529) is 220 ft, based on 321 wells with recorded depths in the state WI DNR database. Half fall between 178 ft and 284 ft; 90% are shallower than 340 ft.

How much does it cost to drill a well in and around Dane (53529)?

Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dane (53529)?

The median static water level is 91 ft below ground surface (middle half of wells: 53 ft–148 ft), from 320 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 1 100–150 ft 37 150–200 ft 89 200–300 ft 129 300–400 ft 55 400–600 ft 9 600+ ft 1
Looking at a specific property in Dane (53529)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dane (53529)

Free. Goes to licensed drillers working Dane County.

Part of Dane County well records.

Method: medians computed from WI DNR records (drilled water wells (well-construction reports) — geothermal loop/heat-exchange, anode, test and dry holes excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.